Commentary

George Crump
 

NAS Clusters, How Should You Couple?

A split decision surrounds the use of tightly coupled or loosely coupled solutions. There aren't enough implemented cases yet available to make a determination on the best approach; the deployments that have been made aren't stretching either method to the point a real determination can be made.

A split decision surrounds the use of tightly coupled or loosely coupled solutions. There aren't enough implemented cases yet available to make a determination on the best approach; the deployments that have been made aren't stretching either method to the point a real determination can be made.My basic belief is that loosely coupled architectures will be more cost effective and more flexible, allowing for a mix and match of solutions by providing options as to what hardware you choose for the compute nodes and the storage. There should be some concern about performance scale because you are limited to the I/O potential of a single box at any given point in time. There also might be some concern over the communication management required between all the semi-independent nodes.

Tightly coupled NAS clusters, on the other hand, are typically bought as a preconfigured solution from the supplier. While still likely to be cost effective, they may not be as much so as loosely coupled clusters. That said, they may have greater reliability in the field since the manufacturer is in control of the entire configuration. In a loosely coupled cluster, the weak link is what is introduced into it. If you use an inexpensive node or dirt cheap storage and it fails, that could compromise the solution.


More Storage Insights

White Papers

More >>

Reports

More >>

Webcasts

More >>

Performance and scale should be the key differentiator. As I mentioned above, with a loosely coupled cluster you are limited to the capabilities of the individual node, which in most customer's situations shouldn't be an issue. Tightly coupled clusters essentially scale as you add nodes; the more nodes you add, the more storage I/O performance you get and, in many cases, the more network I/O performance you achieve.

The truth is, we don't know yet. In NAS clusters there are few cases that I have heard of customers hitting the wall. And once again, you should make the selection on what makes sense for you. If both methods can hit your performance and capacity needs as far into the future as you can predict, then look for the service, support, and features you think will make the project successful.

Be sure to register for our upcoming Webinar, Demystifying Primary Storage Data Reduction.

Track us on Twitter: http://twitter.com/storageswiss.

Subscribe to our RSS feed.

George Crump is founder of Storage Switzerland, an analyst firm focused on the virtualization and storage marketplaces. It provides strategic consulting and analysis to storage users, suppliers, and integrators. An industry veteran of more than 25 years, Crump has held engineering and sales positions at various IT industry manufacturers and integrators. Prior to Storage Switzerland, he was CTO at one of the nation's largest integrators.


Related Reading




Currently we allow the following HTML tags in comments:

Single tags

These tags can be used alone and don't need an ending tag.

<br> Defines a single line break

<hr> Defines a horizontal line

Matching tags

These require an ending tag - e.g. <i>italic text</i>

<a> Defines an anchor

<b> Defines bold text

<big> Defines big text

<blockquote> Defines a long quotation

<caption> Defines a table caption

<cite> Defines a citation

<code> Defines computer code text

<em> Defines emphasized text

<fieldset> Defines a border around elements in a form

<h1> This is heading 1

<h2> This is heading 2

<h3> This is heading 3

<h4> This is heading 4

<h5> This is heading 5

<h6> This is heading 6

<i> Defines italic text

<p> Defines a paragraph

<pre> Defines preformatted text

<q> Defines a short quotation

<samp> Defines sample computer code text

<small> Defines small text

<span> Defines a section in a document

<s> Defines strikethrough text

<strike> Defines strikethrough text

<strong> Defines strong text

<sub> Defines subscripted text

<sup> Defines superscripted text

<u> Defines underlined text

InformationWeek encourages readers to engage in spirited, healthy debate, including taking us to task. However, InformationWeek moderates all comments posted to our site, and reserves the right to modify or remove any content that it determines to be derogatory, offensive, inflammatory, vulgar, irrelevant/off-topic, racist or obvious marketing/SPAM. InformationWeek further reserves the right to disable the profile of any commenter participating in said activities.

Disqus Tips To upload an avatar photo, first complete your Disqus profile. | View the list of supported HTML tags you can use to style comments. | Please read our commenting policy.
T-Shirt Giveaway T-Shirt Giveaway: Each week we're selecting one great comment from our readers. The author of the comment will receive an InformaitonWeek Community t-shirt. So get posting!
Subscribe to RSS

Resource Links