Cisco Pitches Virtual Switches For Next-Gen Data Centers
Company sees new virtualization switch as heart of its Data Center 3.0 architecture.
Cisco systems this week starts pitching a new switch, called Nexus, as the first component of its Data Center 3.0 architecture and as the successor to the Catalyst 6500, the most successful product in Cisco's (or just about any company's) history. Like the Catalyst 6500, the Nexus is a chassis intended for the enterprise data center, into which customers stack blades for additional interfaces. But whereas the Catalyst 6500 is a jack-of-all-trades that can be a firewall, a load balancer, or a router depending on the blades plugged into it, the Nexus is aimed at just one job: virtualization.
Cisco's vision is one in which big companies off-load an increasing number of server tasks to network switches, with servers ultimately becoming little more than virtual machines inside a switch. The Nexus doesn't deliver that, but it makes a start, aiming to virtualize the network interface cards, host bus adapters, and cables that connect servers to networks and remote storage. At present, those require dedicated local area networks and storage area networks, with each using a separate network interface card and host bus adapter for every virtual server. The Nexus aims to consolidate them all into one (or two, for redundancy), with virtual servers connecting through virtual NICs.
Cisco's interest in expanding the network's scope is obvious--the Catalyst 6500 platform alone has generated more than $20 billion in revenue over its lifetime. But Cisco isn't the only one moving toward virtual I/O. Brocade last week introduced the DCX Backbone, a switch that aims to do much the same as Cisco's Nexus: consolidate SAN and LAN into a single network, and virtualize the NICs that connect them to virtual servers. But the two companies take a different approach at the physical layer, a function of their different roots.
As a router company, Cisco bases its networks on Ethernet: Virtual servers may see a virtual Fibre Channel SAN, but really they're using an Ethernet cable that's shared with other network traffic. The Nexus can still use Fibre Channel, but only for connections to legacy storage targets such as disk drives, and only because disks have a slower replacement cycle than servers, so older systems stay in use longer. Conversely, storage company Brocade uses Fibre Channel for the physical connection to servers, running virtual Ethernet to virtual servers. Brocade expects that it eventually will migrate to Ethernet, too, but that right now Fibre Channel is more reliable.
NOT SO FAST
Customers may want to wait before investing in either approach. The Cisco and Brocade product lines are immature. Brocade's currently is just a storage switch, with the links to Ethernet networks due later this year. Cisco says that it can connect to both Ethernet and Fibre Channel immediately, but not yet at the promised maximum capacity. Cisco says that modules eventually will be available to support 40-Gbps and 100-Gbps Ethernet, though when will depend on standardization efforts by the IEEE. Currently, both companies' boxes are limited to 10 Gbps per interface.
It's also unclear how Cisco plans to use the technology from Nuova Systems, an I/O virtualization startup in which it acquired an 80% stake last August. Since then, Nuova has revealed very little, other than that its products involve Fibre Channel over Ethernet--very similar to the functionality in Cisco's Nexus. But according to Cisco, there's nothing developed by Nuova in the Nexus.
Cisco's previous acquisition strategy has been to add other companies' technology to the Catalyst 6500, usually by converting a standalone appliance into a Catalyst blade. It won't be doing the same with the Nexus, mostly because 100 Gbps is just too fast for wire-speed processing. According to Cisco, the main issue is thermal, as the switch has no way to get rid of the heat that application accelerators or firewalls would generate at such high speeds.
Cisco and Brocade aren't the only vendors offering I/O virtualization. The first to ship a product was Xsigo Systems, a startup that sells a dedicated appliance for converting virtual Ethernet and Fibre Channel into the real thing. Another startup, 3Leaf Systems, says it can do the same thing using a dedicated server instead of an appliance. Both run their virtual networks over InfiniBand, which performs even better than Fibre Channel. Cisco and Brocade say they may support InfiniBand in the future, but only if customers demand it.
2014 Next-Gen WAN SurveyWhile 68% say demand for WAN bandwidth will increase, just 15% are in the process of bringing new services or more capacity online now. For 26%, cost is the problem. Enter vendors from Aryaka to Cisco to Pertino, all looking to use cloud to transform how IT delivers wide-area connectivity.
The UC Infrastructure TrapWorries about subpar networks tanking unified communications programs could be valid: Thirty-one percent of respondents have rolled capabilities out to less than 10% of users vs. 21% delivering UC to 76% or more. Is low uptake a result of strained infrastructures delivering poor performance?
InformationWeek Must Reads Oct. 21, 2014InformationWeek's new Must Reads is a compendium of our best recent coverage of digital strategy. Learn why you should learn to embrace DevOps, how to avoid roadblocks for digital projects, what the five steps to API management are, and more.