Infrastructure // Data Center
Commentary
10/18/2013
02:51 PM
Martin Casado
Martin Casado
Commentary
Connect Directly
Facebook
Twitter
RSS
E-Mail
50%
50%
Repost This

VMware Execs Talk Virtualized Networks And Visibility

VMware's Martin Casado and Bruce Davie discuss the benefits of one aspect of software defined networking: overlaying a physical network with a virtual network.

Of course, the network virtualization layer doesn't know everything about the physical layer. So if, for example, we've tracked a problem down to a particular physical path between hypervisors, it's still going to require some traditional network monitoring tools to further localize the issue to a particular link or device in the network. But the visibility that we have in the virtual networking layer gives us the critical ability to isolate problems to either the virtual or the physical world. Furthermore, many tools that exist to manage physical networks can readily be extended to consume the detailed information that is available from the virtual network layer.

It should be clear that this is quite a change from the way we've traditionally operated networks. You can't just point a network protocol analyzer, such as wireshark, at a physical link and figure out the problem from there. That's not because the protocol analyzer can no longer see the traffic in the overlay -- it's quite straightforward to parse a VXLAN header and see the protocol headers of VM-VM traffic, and thus observe the inter-VM traffic on a given link. It's just that this can't be the only tool in the toolbox, rather one tool that is complemented by the large amount of information that can be gathered from the network virtualization layer.

Note that visibility isn't always just about troubleshooting, but also refers to the problem of mapping VM-VM traffic onto physical network resources. When you build overlay tunnels between hypervisors, traffic is going to follow whatever path the physical (or underlay) network thinks is best. That path will be based on the outer tunnel header and the routing algorithms of the physical network.

The good news is that, by moving a lot of network functions into the vSwitches, overlays make it appealing to use layer 3 routing in the physical network. Many modern data centers are now adopting "leaf-spine" or Clos network L3 designs with large amounts of equal-cost multipath (ECMP) across the core of the data center. These designs efficiently spread traffic across many parallel paths, which often does away with the need to carefully traffic engineer specific traffic flows to certain paths.

If it turns out that ECMP isn't possible in the physical network, then there are a few options. One is to use VM placement as a tool to reduce congestion. This has been done in the past, but network virtualization overlays allow complete freedom to place workloads anywhere in the data center. So if traffic between a pair of VMs is traversing a link and causing congestion, one option is to move a VM so that the traffic no longer traverses that link. And in fact, data gathered from the network virtualization layer can be used to guide VM placement decisions to reduce congestion -- that is, the greater visibility that we have in the virtual networking layer can be used to improve performance at the physical network layer.

Finally, we note that some underlays are appearing with explicit routing capabilities, e.g. to set up a high-speed, fiber-optic net dedicated to high-bandwidth uses, such as a network moving large amounts of real-time exchange information to trading desks. The network virtualization overlay is perfectly positioned to provide information about such flows, because it is already gathering flow-level information directly from vSwitches as described above. It's not a big leap to start passing such information to an underlay that can take advantage of such information.

To sum up, network virtualization shouldn't be seen as a big problem for network visibility. Instead, it's opening up new possibilities for improved visibility into the communication between VMs. With rich APIs for inspecting virtual networks and a combination of new and existing tools, the ability to understand what's going on in data center networks is only getting better.

Previous
2 of 2
Next
Comment  | 
Print  | 
More Insights
Comments
Newest First  |  Oldest First  |  Threaded View
jgherbert
50%
50%
jgherbert,
User Rank: Ninja
11/4/2013 | 4:54:00 PM
re: VMware Execs Talk Virtualized Networks And Visibility

"Finally, we note that some underlays are appearing with explicit routing capabilities, e.g. to set up a high-speed, fiber-optic net dedicated to high-bandwidth uses, such as a network moving large amounts of real-time exchange information to trading desks. The network virtualization overlay is perfectly positioned to provide information about such flows, because it is already gathering flow-level information directly from vSwitches as described above."



This is the part where I see huge value. With companies like Plexxi manipulating network connectivity based on application needs ("affinities" in Plexxi's terminology), and Cisco tomorrow announcing their Application Centric Infrastructure, the ability to get a clear picture of the actual traffic on the network will likely become more and more important as time goes on. Right now one of the weak points for any application-aware solution is that they are arguably only going to be as good as the data that they are given. Being able to pull that directly from the source is a good start; and ultimately being able to make a provisioning request as part of the larger orchestration picture could be key steps to completing the picture.
2014 Private Cloud Survey
2014 Private Cloud Survey
Respondents are on a roll: 53% brought their private clouds from concept to production in less than one year, and 60% ­extend their clouds across multiple datacenters. But expertise is scarce, with 51% saying acquiring skilled employees is a roadblock.
Register for InformationWeek Newsletters
White Papers
Current Issue
Video
Slideshows
Twitter Feed
Audio Interviews
Archived Audio Interviews
GE is a leader in combining connected devices and advanced analytics in pursuit of practical goals like less downtime, lower operating costs, and higher throughput. At GIO Power & Water, CIO Jim Fowler is part of the team exploring how to apply these techniques to some of the world's essential infrastructure, from power plants to water treatment systems. Join us, and bring your questions, as we talk about what's ahead.