Our expensive campus WLAN upgrade didn't account for the growing number of wireless devices per student. Here's what we learned from our mistakes and how we turned them into teaching opportunities.
I help design and operate the wireless network at Bucknell University. Just a few short years ago, we finished an extensive (and extremely expensive) 802.11n deployment, which put us ahead of the wireless game compared to our peer institutions.
We had a pervasive wireless network all over campus. This meant that you could get a wireless signal in about 80% of the offices, classrooms, and residence halls on campus.
We used the standard (at the time) deployment model of placing access points (APs) in hallways to cover as many rooms as possible per AP, and then we patted ourselves on the back for having ubiquitous wireless coverage on campus.
We even thought we had "too much" wireless coverage, because clients would rapidly roam back and forth between a handful of APs. We could log into the controller and watch clients bounce from AP to AP. We would shrug our shoulders and confidently declare, "Yep, too much wireless. Sorry, user. Try turning down your roaming aggressiveness. Oh, you have a Mac? Then there's nothing that we can do for you."
I cringe that this is how we handled some wireless issues, but at the time we honestly believed our design was right, because it was based on collected and reproducible data.
Our pride would come back to bite us. Shortly after the deployment was complete, we realized coverage is only part of the equation. The number of wireless devices per student jumped from one in 2010 to three in 2012. It's now more than four.
[Interop New York's Mobility Track includes 10 sessions on BYOD, essential tools for wireless engineers, cloud WLAN options, and more. Get details and register here.]
As wireless devices proliferated, we found the AP model we had selected became saturated with approximately 20 clients associated with the AP. Our design never accounted for device density, because we never thought users would have four or more devices connected to the network at once.
We also got wise as to why those clients were roaming so frequently. Yes, some of it had to do with limited control of Macs, but most of it had to do with the installation of APs in the hallways.
See, most of the buildings on our campus are extremely old and are made of concrete block or poured concrete, neither of which are RF friendly. Placing APs in the hallway did little to provide a usable signal inside rooms built like bomb shelters. It was so bad in one building that people in rooms directly adjacent to the APs couldn't get a usable connection, even when they opened their doors.
So what did we do to fill the gaps? You guessed it. We put more APs in the hallways. It didn't do much to help the situation, and it wasted time and money.
So we learned our lesson and started doing site surveys. Whenever we got a complaint about poor -- or no -- wireless signals, we took our surveying tools and investigated.
However, we ran into another problem: We'd dispatch to the problem area, usually in a residence hall, and do our survey and find that there was absolutely nothing wrong with the signal. The users would connect without issue and apologize for the inconvenience -- until it happened again, usually around 6:00 p.m. And then it would be fine in the morning until about 6:00 p.m. See the pattern? We learned that doing a site survey in a residence hall when most residents are in class usually will provide false results as to the true wireless environment.
Now we're redesigning our entire wireless network to benchmark --65 dBm in the 5 GHz band by using whatever smartphone we have on hand that
Matt Williams is the Assistant Director of Networking at Bucknell University, a private liberal arts university located in Lewisburg, Pa. He spent six years in the US Army, four years in South Korea, as an IT Specialist before joining Bucknell University in ... View Full Bio
InformationWeek Elite 100Our data shows these innovators using digital technology in two key areas: providing better products and cutting costs. Almost half of them expect to introduce a new IT-led product this year, and 46% are using technology to make business processes more efficient.
Building a Mobile Business MindsetAmong 688 respondents to our Mobile Application Development Survey ó up from 350 respondents in 2012 ó 46% have deployed mobile apps, with an additional 24% planning to in the next year. Whatís the holdup for that remaining 30%? Often, itís a lack of expertise.
Top IT Trends to Watch in Financial ServicesIT pros at banks, investment houses, insurance companies, and other financial services organizations are focused on a range of issues, from peer-to-peer lending to cybersecurity to performance, agility, and compliance. It all matters.
Join us for a roundup of the top stories on InformationWeek.com for the week of October 9, 2016. We'll be talking with the InformationWeek.com editors and correspondents who brought you the top stories of the week to get the "story behind the story."