Windows Vista In A Nutshell: Chapter 2, Using Windows Vista - InformationWeek

InformationWeek is part of the Informa Tech Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them.Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Software // Enterprise Applications

Windows Vista In A Nutshell:
Chapter 2, Using Windows Vista

Preston Gralla's new book, from O'Reilly, thoroughly documents every important setting and feature in Windows Vista. Here, as a free excerpt, is the complete second chapter: Using Windows Vista.

Each window also has a Control menu hidden behind the upper-left corner of the title bar (the bar at the top of the window that contains the filename). You can open the menu by clicking on the upper-left corner, by pressing Alt-space, or by right-clicking on a button on the Taskbar. The Control menu duplicates the function of the maximize, minimize, and close buttons at the right end of the title bar, as well as the resizing and moving you can do with the mouse. Using this menu lets you move or resize the window without the mouse (see the next section, "Keyboard Accelerators," for details). The command line (which you can get to by typing command at the Search box and pressing Enter to open a Command Prompt window) also has a Control menu, which you can access by right-clicking anywhere in the Command Prompt window. It provides access to the Clipboard for cut, copy, and paste actions, as well as settings for the font size and toolbar (if applicable). However, if you have enabled the Command Prompt's QuickEdit Mode (see Chapter 14), right-clicking will paste the contents of the Clipboard into whatever program happens to be running in the Command Prompt.

Keyboard Accelerators

Windows' primary interface is graphical, meaning that you point and click to interact with it. The problem is that repeated clicking can become very cumbersome, especially for repetitive tasks. Luckily, Windows has an extensive array of keyboard accelerators (sometimes called keyboard shortcuts or hot keys), which provide a simple keyboard alternative to almost every feature normally accessible with the mouse. Some of these keyboard accelerators (such as F1 for help, Ctrl-C to copy, and Ctrl-V to paste) date back more than 20 years and are nearly universal, and others are specific to Windows Vista or a given application.

Appendix B gives a complete list of keyboard accelerators. Some of the most important ones are as follows:

Menu navigation

In any window that has a menu, press the Alt key or the F10 key to activate the menu bar, and use the cursor (arrow) keys to move around. Press Enter to activate the currently selected item or Esc to cancel. (Note: use the Alt or F10 key to turn on the menu in Internet Explorer and Windows Explorer.)

You can also activate specific menus with the keyboard. When you press Alt or F10, each menu item will have a single character that is underlined (such as the V in View); when you see this character, it means you can press Alt-V (for example) to go directly to that menu. Once that menu has opened, you can activate any specific item by pressing the corresponding key (such as D for Details); you don't even need to press Alt this time. The abbreviated notation for this is Alt-V+D (which means press Alt and V together, and then press D). You'll notice that it's much faster than using the mouse.

The other way to activate specific menu items is to use the special keyboard shortcuts shown to the right of each menu item (where applicable). For example, open the Edit menu in most windows, and you'll see that Ctrl-Z is a shortcut for Undo, Ctrl-V is a shortcut for Paste, and Ctrl-A is a shortcut for Select All. These are even faster than the navigation hot keys described earlier. Two notes: not all menu items have this type of keyboard shortcut, and these shortcuts work only from within the application that "owns" the menu.

The special case is the Start menu, which you can activate by pressing the Windows logo key (if your keyboard has one) or Ctrl-Esc, regardless of the active window. You can also click the Start button. The Start menu differs from most other menus because you navigate it graphically, although you can also use arrow keys and Return for navigation as well.

Note that once a menu has been activated, you can mix pointer clicks and keystrokes. For example, you could pop up the Start menu by pressing the Windows logo key, and then click on Control Panel.

If there is a conflict and multiple items on a menu have the same accelerator key, pressing the key repeatedly will cycle through the options. You must press Enter when the correct menu item is highlighted to actually make the selection.

Window manipulation without the mouse

The Control menu, described in the preceding section, facilitates the resizing and moving of windows with the keyboard only. Press Alt-Space bar to open the active window's Control menu, and then choose the desired action. If you choose to move the window, the mouse pointer will change to a little four-pointed arrow, which is your cue to use the cursor (arrow) keys to do the actual moving. Likewise, selecting Resize will allow you to stretch any window edge using the cursor keys. In either case, press Enter when you're happy with the result, or press Esc to cancel the operation. If a window can't be resized or minimized, for example, those menu items will not be present. Note that Control menus work just like normal menus, so you could press Alt-Space bar+M to begin moving a window.


In most applications, Ctrl-X will cut a selected item to an invisible storage area called the Clipboard, Ctrl-C will copy it to the Clipboard, and Ctrl-V will paste it into a new location. Using the Delete key will simply erase the selection (or delete the file). There is a single, system-wide Clipboard that all applications share. This Clipboard lets you copy something from a document in one program and paste it into another document in another program. You can paste the same data repeatedly until new data replaces it on the Clipboard. See Chapter 3 for more information.

Tip Although you probably think of cut-and-paste operations as something you do with selected text or graphics in an application, you can use the same keys for file operations. For example, select a file on the Desktop and press Ctrl-X. Then move to another folder and press Ctrl-V, and Windows will move the file to the new location just as though you dragged and dropped it.


In Windows Vista, when you simultaneously press the Ctrl, Alt, and Delete keys, you activate a screen that lets you lock the computer, switch users, log off, change a password, or start the Task Manager, which, among other things, allows you to close crashed applications. You can also click Cancel to go back to what you were doing previously. In Windows XP, pressing Ctrl-Alt-Delete would immediately run the Task Manager.

Alt-Tab and Alt-Esc

Both of these key combinations switch between open windows, albeit in different ways. Alt-Tab runs Windows Flip, which shows thumbnails of all open windows--hold Alt and press Tab repeatedly to move the selection. Alt-Esc has no window; instead, it simply sends the active window to the bottom of the pile and activates the next one in the row. Note that Alt-Tab also includes minimized windows, but Alt-Esc does not. If there's only one open window, Alt-Esc has no effect, although Alt-Tab will show two thumbnails--the open window and the Desktop. Also, neither method activates the Start menu (Ctrl-Esc).

Tab and arrow keys

Within a window, Tab will move the focus from one control to the next; use Shift-Tab to move backward. A control may be a text field, a drop-down list, a pushbutton, or any number of other controls. For example, in a folder window, Tab will cycle between the major components of the window: the Favorite Links, file display area, Search box, folder list, and so on. Use arrow keys in these areas to make a new selection without moving the focus. Sometimes a dialog box will have one or more regions, indicated by a rectangular box within the dialog box. The arrow keys will cycle through buttons or fields only within the current regions. Tab will cross region boundaries and cycle through all the buttons or fields in the dialog box. In addition, some dialog boxes let you cycle through controls with Tab.

If there's only one control, such as in a simple folder window, Tab has no effect. In some applications, such as word processors and spreadsheets, Tab is assigned to a different function (such as indenting).

Common Controls

Many application and system windows use a common set of controls in addition to the ubiquitous title bar, menu bar, Control menu, and scroll bars. This section describes a few of these common controls.

Figure 2-7: Common controls in Windows applications and dialogs.

Figure 2-7

Common controls in Windows applications and dialogs.

view the image gallery
Figure 2-7 shows some of the common controls in Control Panel → Appearance and Personalization → Change screen saver, and some other dialog boxes.

Some of these controls include:

(1) Tabbed dialogs

You can group settings into separate tabbed dialog pages. For example, right-click the Taskbar and choose Properties. Click on any tab to bring that page to the front.

(2) Input boxes

Type text or numbers into these boxes to change their values--for example, to change the date or time.

(3) Radio buttons

You use radio buttons for mutually exclusive settings. Clicking on one causes any other that has been pressed to pop up, just like on an old car radio. The button with the dot in the middle is the one that has been selected. Sometimes you'll see more than one group of buttons, with a separate outline around each group. In this case, you can select one radio button from each group.

(4) Button

Click this to get to another menu that offers another set of options to customize.

(5) Grayed-out (inactive) controls

Any control that is grayed out is disabled because the underlying operation is not currently available. In the dialog box shown in Figure 2-7, the Classic Start menu radio button hasn't been selected, so you cannot customize its features.

(6) Button with User Account Control

Among Windows Vista's new security features is User Account Control (UAC), which protects certain system settings from being changed accidentally or by someone with malicious intent. When you see this icon on a button, it means that it is protected by UAC. When you click it, you'll have to type in an administrator password to proceed (if you're not logged in as a user with administrator privileges), or else you'll get a warning and you'll have to click a button to confirm that you want to proceed with your operation.

(7) Checkboxes

Checkboxes are generally used for on/off settings. A checkmark means the setting is on; an empty box means it's off. Click on the box to turn the labeled setting on or off.

(8) Counters

You can either select the number and type in a new value or click on the up or down arrow to increase or decrease the value.

We welcome your comments on this topic on our social media channels, or [contact us directly] with questions about the site.
4 of 6
Comment  | 
Print  | 
More Insights
IT Careers: Top 10 US Cities for Tech Jobs
Cynthia Harvey, Freelance Journalist, InformationWeek,  1/14/2020
Predictions for Cloud Computing in 2020
James Kobielus, Research Director, Futurum,  1/9/2020
What's Next: AI and Data Trends for 2020 and Beyond
Jessica Davis, Senior Editor, Enterprise Apps,  12/30/2019
White Papers
Register for InformationWeek Newsletters
Current Issue
The Cloud Gets Ready for the 20's
This IT Trend Report explores how cloud computing is being shaped for the next phase in its maturation. It will help enterprise IT decision makers and business leaders understand some of the key trends reflected emerging cloud concepts and technologies, and in enterprise cloud usage patterns. Get it today!
Flash Poll