Mobile // Mobile Devices
News
8/11/2011
12:29 PM
Connect Directly
Twitter
RSS
E-Mail
50%
50%

Heavy Duty Tablet For Networking Pros: OptiView XG

Fluke Networks' ruggedized tablet is expensive and weighty yet offers network engineers a powerful tool to take into the field.

Fluke Networks' OptiView XG Network Analysis Tablet
(click image for larger view)
Fluke Networks' OptiView XG Network Analysis Tablet
Network engineers whose jobs require them to go on site to test networks for problems often need a host of tools at their disposal, ranging from testing and monitoring devices to different software applications for analysis and evaluation. If only there were some way to get all this functionality in one portable device.

Fluke Networks' OptiView XG is vying to be that all-in-one device, a tablet designed specifically for networking professionals. The OptiView XG comes with a full set of Fluke Networks' network analysis and testing tools pre-installed, and is configured with all of the hardware needed to monitor, test, and analyze any wired or wireless network. The OptiView XG tablet runs Windows 7 and has a 10.25-inch touch-sensitive screen.

Of course, calling this device a tablet is a little misleading; if you're imagining an iPad, think again. The OptiView XG is more of a cross between a laptop and a dedicated network-testing device. The large, heavy ruggedized device measures a chunky two inches thick and weighs 5.6 pounds. The OptiView XG is also much pricier than your typical tablet, costing from $25,000 to $30,000, depending on options and where you buy it. This makes it one of the most expensive tablets in the world. Then again, when you add up the cost of buying the separate software apps and network test devices needed approximate the functionality of the OptiView XG, it's not a bad deal.

With its responsive touch screen and familiar Windows 7 interface, the OptiView XG is easy to use. With my test unit, I was able to quickly test any kind of network, from Wi-Fi to wired networks up to 10-Gbps Ethernet. Along with all of the traditional Fluke software, the tablet also includes AirMagnet wireless monitoring software and ClearSight testing applications.

With this bundle of tools and hardware testing capabilities I could look for systems hogging network bandwidth, discover various devices on the network, and perform simple traffic tests to evaluate network performance, among other things.

And while it might not be exactly dainty, the OptiView XG proved portable enough to test on a large campus site. My device came with a nice bag including an adjustable shoulder strap for easy carrying. A built-in handle on the unit itself would have been nice to have, too. At least there is a pop-out stand on the back so you can easily prop it up on a desk or workbench.

Battery life is in the three-hour range but the OptiView XG comes with a second battery that can be hot swapped, essentially providing closer to six hours of use. The OptiView XG also includes dual 802.11N (3X3) Wi-Fi radios, an on-board spectrum analysis radio, a 10-Gbps SFP+ port, a gigabit Ethernet (10/100/1000 Mbps) port and a 100/1000 Mbps SFP+ port.

RECOMMENDED READING:

Lenovo Takes On 7 Rivals: Tablet Faceoff

RIM BlackBerry PlayBook Teardown

HP TouchPad Tablet: Visual Tour

Apple iPad 2 3G Teardown

Motorola Xoom Teardown: Inside The New Android Tablet

InformationWeek Analytics has published a report on backing up VM disk files and building a resilient infrastructure that can tolerate hardware and software failures. After all, what's the point of constructing a virtualized infrastructure without a plan to keep systems up and running in case of a glitch--or outright disaster? Download the report now. (Free registration required.)

Comment  | 
Print  | 
More Insights
Comments
Newest First  |  Oldest First  |  Threaded View
Juls18
50%
50%
Juls18,
User Rank: Apprentice
4/20/2012 | 8:51:00 PM
re: Heavy Duty Tablet For Networking Pros: OptiView XG
Great machine if you have an all Cisco shop, however if you have a IEEE standards based switches like the EX-8216 from Juniper it is an expensive and worthless peice of equipment.

I was told by the sales team how wonderful this unit is and it will not even do nearest switch for me on my EX-8216 swicthes or MX-960 routers. But I can tell you that it works great on all cisco products using CDP, for LLDP on Juniper itis worthless.

I was told that they do not support their MIBs, so my question why not, it is a switch based on the foremost standards body.

I purchased 4 of these at a pretty hefty price and I have regretted it since. It has not made my job not even a little bit simpler or easier than the Optiview 2, unfortunately everything we have is 10GB and moving higher.

In todays market there is a great push for diversity in products. I rate it a 2 because it is great on Cisco products from 2811 and workstation and core switches to the CRS3 routers, it really disappointing with Juniper and if you have a standards based hetrogeneous network I would recommend against it for the simple fact that they can not get their act together with Juniper!

Building A Mobile Business Mindset
Building A Mobile Business Mindset
Among 688 respondents, 46% have deployed mobile apps, with an additional 24% planning to in the next year. Soon all apps will look like mobile apps – and it's past time for those with no plans to get cracking.
Register for InformationWeek Newsletters
White Papers
Current Issue
InformationWeek Tech Digest September 23, 2014
Intrigued by the concept of a converged infrastructure but worry you lack the expertise to DIY? Dell, HP, IBM, VMware, and other vendors want to help.
Flash Poll
Video
Slideshows
Twitter Feed
InformationWeek Radio
Sponsored Live Streaming Video
Everything You've Been Told About Mobility Is Wrong
Attend this video symposium with Sean Wisdom, Global Director of Mobility Solutions, and learn about how you can harness powerful new products to mobilize your business potential.